2024 Anderson Group Co. Mixers Single Auger A380FD

Information

2024 Anderson Group Co. Mixers Single Auger A380FD

The Anderson pull type single auger A380 mixer (conveyor discharge) with side trap discharge, will meet todays needs for high output and intensive use. It has been developed for farms where the footprint of the machine is an important factor. These mixers are compact and highly maneuvrable.

Photos

Highlights

  • Topeka, Indiana
  • 2024
  • Anderson Group Co.
  • Mixers Single Auger A380FD
  • Available
  • Without incline conveyor: 101 in (2.57 m) | With incline conveyor (retracted): 117 in (2.97 m) | Outside width of the wheels: 86 in (2.18 m)
  • 106 in (2.69 m) no extension | 6 in capacity extension: 112 in (2.84 m) | 12 in capacity extension: 118 in (3 m) | 18 in capacity extension: 124 in (3.15 m) | Hay retention ring (additionnal height): 0 in / 3,5 in

Specifications

  • 2024
  • Anderson Group Co.
  • Mixers Single Auger
  • A380FD
  • Feed Wagons
  • Minimum PTO HP Requirement - Low Speed: 50 HP | Minimum PTO HP Requirement - High Speed: 75 HP
  • PTO shaft: 540 RPM 1" 3/8 Z6
  • Security: Shear bolt
  • 2 Speed Gear Box and ratio: D732, 1;1,5 54in(888cm)0 RPM | Auger RPM – Low Speed: 27 RPM | Auger RPM – Standard High speed: 41 RPM
  • 10-15 US gal/ m in 37-56 L/ m in
  • 160-200 bar (2300-2900 psi)
  • 15.0/55-17 26 PLY
  • Incline conveyor chain / belt 3 ft at min. 26 angle /max 40: 35-37in at 26º / 42-42in at 40º | Sidewall Thickness (AR235 grade or equivalent): 1/4 in | Flighting Thickness (AR235 grade or equivalent): 5/8 in | Floor Thickness (AR235 grade or equivalent): 3/4 in | Floor ST (E1) / Conveyor FD (E2) to ground: 26 in (0.66 m) | Incline conveyor operating angle (degrees): 26 @39 degrees | Incline conveyor chain / belt 3 ft at min.26 angle /max 40: 30-28in at 26º / 28-25in at 40º | Incline conveyor chain / belt 4 ft at min. 26 angle /max 40: 39-41in at 26º / 48-48in at 40º | Incline conveyor chain / belt 5 ft at min. 26 angle /max 40: 46-48in at 26º / 59-59in at 40º | Incline conveyor chain / belt 6 ft at min. 26 angle /max 40: 50-52in at 26º / 65-65in at 40º | Incline conveyor chain / belt 7 ft at min. 26 angle /max 40: 57-59in at 26º / 75-75in at 40º | Incline conveyor chain / belt 8 ft at min. 26 angle /max 40: 61-63in at 26º / 82-82in at 40º
  • 217 in (5.51 m)
  • 106 in (2.69 m) no extension | 6 in capacity extension: 112 in (2.84 m) | 12 in capacity extension: 118 in (3 m) | 18 in capacity extension: 124 in (3.15 m) | Hay retention ring (additionnal height): 0 in / 3,5 in
  • Without incline conveyor: 101 in (2.57 m) | With incline conveyor (retracted): 117 in (2.97 m) | Outside width of the wheels: 86 in (2.18 m)
  • 11 020 lb (4998 kg)
  • Capacity (no capacity extension): 380 ft3 (10.8 m3) | 6 in capacity extension: 420 ft3 (11.9 m3) | 12 in capacity extension: 460 ft3 (13 m3) | 18 in capacity extension: 500 ft3 (14.2 m3)
  • Machine (empty) - STD configuration: 9707 lb (4402 kg)
  • Number of Auger: 1 | Load cell: 3 | Axle - Standard specifications: Single