2024 Anderson Group Co. Mixers Single Auger A450ST

Information

2024 Anderson Group Co. Mixers Single Auger A450ST

  • A450dt (side trap discharge)
  • Capacity from 450 ft3 (12.8 m3) to 600 ft3 (17 m3)
  • HP PTO Requirement: in low speed: minimum 60 HP in high speed: minimum 85 HP
  • Height of 112 in (2.84 m) to 130 in (3.3 m) with extension
  • Unloading the material by side trap or front conveyor
  • 1 auger with 12 reversible knives in carbide tungsten

Photos

Highlights

  • Topeka, Indiana
  • 2024
  • Anderson Group Co.
  • Mixers Single Auger A450ST
  • Available
  • Without incline conveyor: 112 in (2.84 m) | With incline conveyor (retracted): 125 in (3.18 m) | Outside width of the wheels: 86 in (2.18 m)
  • 112 in (2.84 m) no extension | 6 in capacity extension: 118 in (3 m) | 12 in capacity extension: 124 in (3.15 m) | 18 in capacity extension: 130 in (3.3 m) | Hay retention ring (additionnal height): 0 in / 3,5 in

Specifications

  • 2024
  • Anderson Group Co.
  • Mixers Single Auger
  • A450ST
  • Feed Wagons
  • Minimum PTO HP Requirement - Low Speed: 60 HP | Minimum PTO HP Requirement - High Speed: 85 HP
  • PTO shaft: 540 RPM 1" 3/8 Z6
  • Security: Shear bolt
  • 2 Speed Gear Box and ratio: D732, 1;1,5 54in(888cm)0 RPM | Auger RPM – Low Speed: 27 RPM | Auger RPM – Standard High speed: 41 RPM
  • 10-15 US gal/ m in 37-56 L/ m in
  • 160-200 bar (2300-2900 psi)
  • 15.0/55-17 26 PLY
  • Incline conveyor chain / belt 3 ft at min. 26 angle /max 40: 36-40in at 26º / 46-46in at 40º | Sidewall Thickness (AR235 grade or equivalent): 1/4 in | Flighting Thickness (AR235 grade or equivalent): 5/8 in | Floor Thickness (AR235 grade or equivalent): 3/4 in | Floor ST (E1) / Conveyor FD (E2) to ground: 36 in (0.91 m) | Incline conveyor operating angle (degrees): 26 @39 degrees | Incline conveyor chain / belt 3 ft at min.26 angle /max 40: 23-16in at 26º / 20-13in at 40º | Incline conveyor chain / belt 4 ft at min. 26 angle /max 40: 40-44in at 26º / 53-53in at 40º | Incline conveyor chain / belt 5 ft at min. 26 angle /max 40: 46-50in at 26º / 63-63in at 40º | Incline conveyor chain / belt 6 ft at min. 26 angle /max 40: 50-54in at 26º / 69-69in at 40º | Incline conveyor chain / belt 7 ft at min. 26 angle /max 40: 56-60in at 26º / 79-79in at 40º | Incline conveyor chain / belt 8 ft at min. 26 angle /max 40: 60-64in at 26º / 85-85in at 40º
  • 190 in (4.84 m)
  • 112 in (2.84 m) no extension | 6 in capacity extension: 118 in (3 m) | 12 in capacity extension: 124 in (3.15 m) | 18 in capacity extension: 130 in (3.3 m) | Hay retention ring (additionnal height): 0 in / 3,5 in
  • Without incline conveyor: 112 in (2.84 m) | With incline conveyor (retracted): 125 in (3.18 m) | Outside width of the wheels: 86 in (2.18 m)
  • 13 050 lb (59in(150cm)18 kg)
  • Capacity (no capacity extension): 450 ft3 (12.8 m3) | 6 in capacity extension: 500 ft3 (14.2 m3) | 12 in capacity extension: 550 ft3 (15.6 m3) | 18 in capacity extension: 600 ft3 (17 m3)
  • Machine (empty) - STD configuration: 8765 lb (3975 kg)
  • Number of Auger: 1 | Load cell: 3 | Axle - Standard specifications: Single