Topeka New Holland

Specifications

• 2024 Anderson Group Co. Mixers Single Auger S450ST
• Year2024
• ManufacturerAnderson Group Co.
• Model NameMixers Single Auger
• Trim NameS450ST
• Generic Type (Primary)Stationary Feeder
• Minimum Engine PowerMinimum PTO HP Requirement - High Speed: 50 HP
• PTO
• PTO Power, Rated Engine SpeedPTO shaft: 540 RPM 1’’ 3/8 Z6
• Drivetrain
• DrivelineSecurity: Shear bolt
• Operational
• Operating SpeedAuger RPM – Standard High speed: 17 RPM
• Hydraulics
• Hydraulic Flow10-15 US gal/ m in 37-56 L/ m in
• Maximum Pressure160-200 bar (2300-2900 psi)
• DimensionsSidewall Thickness (AR235 grade or equivalent): 1/4 in | Flighting Thickness (AR235 grade or equivalent): 5/8 in | Floor Thickness (AR235 grade or equivalent): 3/4 in | Floor ST (E1) / Conveyor FD (E2) to ground: 33 in (0,84 m) | Incline conveyor operating angle (degrees): 23 @ 39 | Incline conveyor 3ft Chain-Belt 26°: 29in(74cm) -33in(83cm) | Incline conveyor 4ft Chain-Belt 26°: 33in(83cm) -37in(94cm) | Incline conveyor 5ft Chain-Belt 26°: 39in(99cm) -43in(109cm) | Incline conveyor 6ft Chain-Belt 26°: 43in(109cm) -47in(119cm) | Incline conveyor 7ft Chain-Belt 26°: 49in(124cm) -53in(135cm) | Incline conveyor 8ft Chain-Belt 26°: 53in(135cm) -57in(145cm) | Incline conveyor 3ft Chain-Belt 40°: 40in(102cm) -40in(102cm) | Incline conveyor 4ft Chain-Belt 40°: 47in(119cm) -47in(119cm) | Incline conveyor 5ft Chain-Belt 40°: 57in(145cm) -57in(145cm) | Incline conveyor 6ft Chain-Belt 40°: 63in(160cm) -63in(160cm) | Incline conveyor 7ft Chain-Belt 40°: 73in(185cm) -73in(185cm) | Incline conveyor 8ft Chain-Belt 40°: 79in(201cm) -79in(201cm)
• Length154 in (3,92 m)
• Height106 in (2,69 m) no extension | 6 in capacity extension: 112 in (2,84 m) | 12 in capacity extension: 118 in (3 m) | 18 in capacity extension: 124 in (3,15 m) | Hay retention ring (additionnal height): 0 in / 3,5 in
• WidthWithout incline conveyor: 112 in (2,84 m) | With incline conveyor (retracted): 125 in (3,18 m)
• Capacities
• Load Capacity, Land13 050 lb (5918 kg)
• VolumeCapacity (no capacity extension): 450 ft3 (12,8 m3) | 6 in capacity extension: 500 ft3 (14,2 m3) | 12 in capacity extension: 550 ft3 (15,6 m3) | 18 in capacity extension: 600 ft3 (17 m3)
• Weights
• WeightMachine (empty) - STD configuration: 9251 lb (4195 kg)
• FeaturesNumber of Auger: 1 | Load cell: 3