2024 Anderson Group Co. Mixers Twin Auger A520ST

Information

2024 Anderson Group Co. Mixers Twin Auger A520ST

The Anderson pull type A520 twin auger mixer (side trap discharge) has the ability to mix the widest variety of ingredients. Process large amount of hay, even complete square and round bales of baleage. Available with several discharge options. Whether your rations are designed to increase milk production of dairy cows or minimize variation in feed for each group you feed, vertical mixer will help optimize the dry matter and nutrient intake of your herd.

Photos

Highlights

  • Topeka, Indiana
  • 2024
  • Anderson Group Co.
  • Mixers Twin Auger A520ST
  • Available
  • Without incline conveyor: 101 in (2.57 m) | With incline conveyor (retracted): 115 in (2.92 m) | Outside width of the wheels: 99 in (2.51 m)
  • 102 in (2.59in(150cm) m) no extension | 6 in capacity extension: 108 in (2.74 m) | 12 in capacity extension: 114 in (2.9 m) | 18 in capacity extension: 120 in (3.05 m) | Hay retention ring (additionnal height): 0 in / 3,5 in

Specifications

  • 2024
  • Anderson Group Co.
  • Mixers Twin Auger
  • A520ST
  • Feed Wagons
  • Minimum PTO HP Requirement - Low Speed: 80 HP | Minimum PTO HP Requirement - High Speed: 120 HP
  • PTO shaft: 540 RPM 1" 3/8 Z6 | Shaft - Option specification: 1000 RP m 1" 3/8 Z21
  • Security: Shear bolt
  • 385/65R22.5-20
  • Auger RPM – Low Speed: 27 RPM | Auger RPM – Standard High speed: 41 RPM | 2 Speed Gear Box and ratio: C3A-R, 1;1,5 54in(888cm)0 RPM C3A-R, 1,8;2,7 1000 RPM
  • 10-15 US gal/ m in 37-56 L/ m in
  • 160-200 bar (2300-2900 psi)
  • Incline conveyor chain / belt 3 ft at min. 26 angle /max 40: 34-38in at 26º / 44-44in at 40º | Sidewall Thickness (AR235 grade or equivalent): 1/4 in | Flighting Thickness (AR235 grade or equivalent): 5/8 in | Floor Thickness (AR235 grade or equivalent): 5/8 in | Floor ST (E1) / Conveyor FD (E2) to ground: 34 in (0.85 m) | Incline conveyor operating angle (degrees): 226 @39 degrees | Incline conveyor chain / belt 3 ft at min.26 angle /max 40: 29-22in at 26º / 27-20in at 40º | Incline conveyor chain / belt 4 ft at min. 26 angle /max 40: 38-42in at 26º / 51-51in at 40º | Incline conveyor chain / belt 5 ft at min. 26 angle /max 40: 44-48in at 26º / 61-61in at 40º | Incline conveyor chain / belt 6 ft at min. 26 angle /max 40: 48-52in at 26º / 67-67in at 40º | Incline conveyor chain / belt 7 ft at min. 26 angle /max 40: 54-58in at 26º / 77-77in at 40º | Incline conveyor chain / belt 8 ft at min. 26 angle /max 40: 58-62in at 26º / 84-84in at 40º
  • 242 in (6.15 m)
  • 102 in (2.59in(150cm) m) no extension | 6 in capacity extension: 108 in (2.74 m) | 12 in capacity extension: 114 in (2.9 m) | 18 in capacity extension: 120 in (3.05 m) | Hay retention ring (additionnal height): 0 in / 3,5 in
  • Without incline conveyor: 101 in (2.57 m) | With incline conveyor (retracted): 115 in (2.92 m) | Outside width of the wheels: 99 in (2.51 m)
  • 15 080 lb (6839 kg)
  • Capacity (no capacity extension): 520 ft3 (14.7 m3) | 6 in capacity extension: 574 ft3 (16.3 m3) | 12 in capacity extension: 628 ft3 (17.8 m3) | 18 in capacity extension: 682in(208cm) ft3 (19.3 m3)
  • Machine (empty) - STD configuration: 11 744 lb (5326 kg)
  • Number of Auger: 2 | Load cell: 3 | Scale system: DG500 | Axle - Standard specifications: Single