2024 Anderson Group Co. Mixers Twin Auger A700FD

Information

2024 Anderson Group Co. Mixers Twin Auger A700FD

The pull type twin auger A700 mixer (conveyor discharge) is designed for intensive daily use. These mixers are adaptable depending on the configuration of the operation and the type of farming . The solution for every size farm.

Features may include:

  • Capacity 695 pi3 à 897 pi3.
  • Reinforced tub fl oor provides longevity of the tub and also to the load cells by equalizing the weight uniformly.
  • TRI-CUT™, auger with 2-position adjustable and reversible knives (10 standard) and 2 sweeping dispensers ensuring a 30% faster and more consistent discharge.
  • Discharge options: Side trap or front conveyor.
  • Carbide treated self-sharpening tungsten knives.
  • Industry’s fi rst hydraulic TRUE-CUT™ restrictor blades allows the operator to engage and disengage during the mixing process preventing all risks of overprocessing feed.
  • The DG500 indicator is a universal, programmable weighing indicator for recipes, dispensing and data storage. It guarantees an extremely precise weighing thanks to the protected load cells and strategically located under the tank. Compatible with the DTM suite.
  • 4-point scale system.
  • Rolled side walls (not bent) for better fl ow of material, avoiding restriction around auger and naturally increased sturdiness.

Photos

Highlights

  • Topeka, Indiana
  • 2024
  • Anderson Group Co.
  • Mixers Twin Auger A700FD
  • Available
  • Without incline conveyor: 101 in (2.57 m) | With incline conveyor (retracted): 117 in (2.97 m) | Outside width of the wheels: 100 in (2.54in(888cm) m)
  • 110 in (2.79 m) no extension | 6 in capacity extension: 116 in (2.95 m) | 12 in capacity extension: 121 in (3.07 m) | 18 in capacity extension: 128 in (3.25 m) | Hay retention ring (additionnal height): 0 in / 3,5 in

Specifications

  • 2024
  • Anderson Group Co.
  • Mixers Twin Auger
  • A700FD
  • Feed Wagons
  • Minimum PTO HP Requirement - Low Speed: 100 HP | Minimum PTO HP Requirement - High Speed: 150 HP
  • PTO shaft: 1000 RPM 1" 3/8 Z21 | PTO shaft - Option specification: 1000 RPM 1"3/4 Z20 54in(888cm)0 RPM 1" 3/8 Z6
  • Security: Shear bolt
  • 275/70R22.5 (DOUBLE)
  • Auger RPM – Low Speed: 27 RPM | Auger RPM – Standard High speed: 41 RPM | 2 Speed Gear Box and ratio: C3A-R, 1;1,5 54in(888cm)0 RPM C3A-R, 1,8;2,7 1000 RPM
  • 10-15 US gal/ min 37-56 L/ min
  • 160-200 bars (2300-2900 psi)
  • Incline conveyor chain / belt 3 ft at min. 26 angle /max 40: 41-43in at 26º / 50-50in at 40º | Sidewall Thickness (AR235 grade or equivalent): 1/4 in | Flighting Thickness (AR235 grade or equivalent): 5/8 in | Floor Thickness (AR235 grade or equivalent): 3/4 in | Floor ST (E1) / Conveyor FD (E2) to ground: 34 in (0.86 m) | Incline conveyor operating angle (degrees): 26 @ 39 | Incline conveyor chain / belt 3 ft at min.26 angle /max 40: 30-28in at 26º / 28-25in at 40º | Incline conveyor chain / belt 4 ft at min. 26 angle /max 40: 45-47in at 26º / 56-56in at 40º | Incline conveyor chain / belt 5 ft at min. 26 angle /max 40: 52-54in at 26º / 67-67in at 40º | Incline conveyor chain / belt 6 ft at min. 26 angle /max 40: 56-58in at 26º / 73-73in at 40º | Incline conveyor chain / belt 7 ft at min. 26 angle /max 40: 60-64in at 26º / 83-83in at 40º | Incline conveyor chain / belt 8 ft at min. 26 angle /max 40: 63-65in at 26º / 90-90in at 40º
  • 309 in (7.86 m)
  • 110 in (2.79 m) no extension | 6 in capacity extension: 116 in (2.95 m) | 12 in capacity extension: 121 in (3.07 m) | 18 in capacity extension: 128 in (3.25 m) | Hay retention ring (additionnal height): 0 in / 3,5 in
  • Without incline conveyor: 101 in (2.57 m) | With incline conveyor (retracted): 117 in (2.97 m) | Outside width of the wheels: 100 in (2.54in(888cm) m)
  • 20 300 lb (9206 kg)
  • Capacity (no capacity extension): 700 ft3 (19.8 m3) | 6 in capacity extension: 770 ft3 (21.8 m3) | 12 in capacity extension: 840 ft3 (23.8 m3) | 18 in capacity extension: 910 ft3 (25.8 m3)
  • Machine (empty) - STD configuration: 17 117 lb (7763 kg)
  • Number of Auger: 2 | Load cell: 4 | Scale system: DG500 | Axle - Standard specifications: Single