2024 Anderson Group Co. Mixers Twin Auger A700ST

Information

2024 Anderson Group Co. Mixers Twin Auger A700ST

The pull type twin auger A700 mixer (side trap discharge) is designed for intensive daily use. These mixers are adaptable depending on the configuration of the operation and the type of farming. The solution for every size farm.

Photos

Highlights

  • Topeka, Indiana
  • 2024
  • Anderson Group Co.
  • Mixers Twin Auger A700ST
  • Available
  • Without incline conveyor: 101 in (2.57 m) | With incline conveyor (retracted): 117 in (2.97 m) | Outside width of the wheels: 100 in (2.54in(888cm) m)
  • 110 in (2.79 m) no extension | 6 in capacity extension: 116 in (2.95 m) | 12 in capacity extension: 121 in (3.07 m) | 18 in capacity extension: 128 in (3.25 m) | Hay retention ring (additionnal height): 0 in / 3,5 in

Specifications

  • 2024
  • Anderson Group Co.
  • Mixers Twin Auger
  • A700ST
  • Feed Wagons
  • Minimum PTO HP Requirement - Low Speed: 100 HP | Minimum PTO HP Requirement - High Speed: 150 HP
  • PTO shaft: 1000 RPM 1" 3/8 Z21 | PTO shaft - Option specification: 1"3/4 Z20 54in(888cm)0 RPM 1" 3/8 Z6
  • Security: Shear bolt
  • 275/70R22.5 (DOUBLE)
  • Auger RPM – Low Speed: 27 RPM | Auger RPM – Standard High speed: 41 RPM | 2 Speed Gear Box and ratio: C3A-R, 1;1,5 54in(888cm)0 RPM C3A-R, 1,8;2,7 1000 RPM
  • 10-15 US gal/ min 37-56 L/ min
  • 160-200 bars (2300-2900 psi)
  • Incline conveyor chain / belt 3 ft at min. 26 angle /max 40: 43-47in at 26º / 53-53in at 40º | Sidewall Thickness (AR235 grade or equivalent): 1/4 in | Flighting Thickness (AR235 grade or equivalent): 5/8 in | Floor Thickness (AR235 grade or equivalent): 3/4 in | Floor ST (E1) / Conveyor FD (E2) to ground: 44 in (1.12 m) | Incline conveyor operating angle (degrees): 26 @39 | Incline conveyor chain / belt 3 ft at min.26 angle /max 40: 30-23in at 26º / 27-20in at 40º | Incline conveyor chain / belt 4 ft at min. 26 angle /max 40: 46-50in at 26º / 59-59in at 40º | Incline conveyor chain / belt 5 ft at min. 26 angle /max 40: 53-57in at 26º / 69-69in at 40º | Incline conveyor chain / belt 6 ft at min. 26 angle /max 40: 57-61in at 26º / 76-76in at 40º | Incline conveyor chain / belt 7 ft at min. 26 angle /max 40: 63-67in at 26º / 86-86in at 40º | Incline conveyor chain / belt 8 ft at min. 26 angle /max 40: 67-71in at 26º / 92-92in at 40º
  • 288 in (7.32 m)
  • 110 in (2.79 m) no extension | 6 in capacity extension: 116 in (2.95 m) | 12 in capacity extension: 121 in (3.07 m) | 18 in capacity extension: 128 in (3.25 m) | Hay retention ring (additionnal height): 0 in / 3,5 in
  • Without incline conveyor: 101 in (2.57 m) | With incline conveyor (retracted): 117 in (2.97 m) | Outside width of the wheels: 100 in (2.54in(888cm) m)
  • 20 300 lb (9206 kg)
  • Capacity (no capacity extension): 700 ft3 (19.8 m3) | 6 in capacity extension: 770 ft3 (21.8 m3) | 12 in capacity extension: 840 ft3 (23.8 m3) | 18 in capacity extension: 910 ft3 (25.8 m3)
  • Machine (empty) - STD configuration: 15 987 lb (7250 kg)
  • Number of Auger: 2 | Load cell: 4 | Scale system: DG500 | Axle - Standard specifications: Single