2024 Anderson Group Co. Mixers Twin Auger S520ST

Information

2024 Anderson Group Co. Mixers Twin Auger S520ST

The Anderson stationary type S520ST twin auger mixer (side trap discharge) has the ability to mix the widest variety of ingredients. Process large amount of hay, even complete square and round bales of baleage. Whether your rations are designed to increase milk production of dairy cows or minimize variation in feed for each group you feed, vertical mixer will help optimize the dry matter and nutrient intake of your herd.

Photos

Highlights

  • Topeka, Indiana
  • 2024
  • Anderson Group Co.
  • Mixers Twin Auger S520ST
  • Available
  • Without incline conveyor: 101 in (2,57 m) | With incline conveyor (retracted): 115 in (2,92 m) | Outside width of the wheels: 86 in (2.18 m)
  • 98 in (2,5 m) no extension | 6 in capacity extension: 104 in (2,65 m) | 12 in capacity extension: 110 in (2,8 m) | 18 in capacity extension: 116 in (2,95 m) | Hay retention ring (additionnal height): 0 in / 3,5 in

Specifications

  • 2024
  • Anderson Group Co.
  • Mixers Twin Auger
  • S520ST
  • Stationary Feeder
  • Minimum PTO HP Requirement - High Speed: 60 HP
  • PTO shaft: 540 RPM 1’’ 3/8 Z6
  • Security: Shear bolt
  • Auger RPM – Standard High speed: 17 RPM
  • Incline conveyor chain / belt 3 ft at min. 26 angle /max 40: 35-37in at 26º / 42-42in at 40º | Sidewall Thickness (AR235 grade or equivalent): 1/4 in | Flighting Thickness (AR235 grade or equivalent): 5/8 in | Floor Thickness (AR235 grade or equivalent): 3/4 in | Floor ST (E1) / Conveyor FD (E2) to ground: 33 in (0,84 m) | Incline conveyor operating angle (degrees): 23 @ 39 | Incline conveyor 3ft Chain-Belt 26°: 29in(74cm) -33in(83cm) | Incline conveyor 4ft Chain-Belt 26°: 33in(83cm) -37in(94cm) | Incline conveyor 5ft Chain-Belt 26°: 39in(99cm) -43in(109cm) | Incline conveyor 6ft Chain-Belt 26°: 43in(109cm) -47in(119cm) | Incline conveyor 7ft Chain-Belt 26°: 49in(124cm) -53in(135cm) | Incline conveyor 8ft Chain-Belt 26°: 53in(135cm) -57in(145cm) | Incline conveyor 3ft Chain-Belt 40°: 39in(99cm) -39in(99cm) | Incline conveyor 4ft Chain-Belt 40°: 46in(117cm) -46in(117cm) | Incline conveyor 5ft Chain-Belt 40°: 56in(142cm) -56in(142cm) | Incline conveyor 6ft Chain-Belt 40°: 62in(157cm) -62in(157cm) | Incline conveyor 7ft Chain-Belt 40°: 72in(183cm) -72in(183cm) | Incline conveyor 8ft Chain-Belt 40°: 79in(201cm) -79in(201cm)
  • 208 in (5,27 m)
  • 98 in (2,5 m) no extension | 6 in capacity extension: 104 in (2,65 m) | 12 in capacity extension: 110 in (2,8 m) | 18 in capacity extension: 116 in (2,95 m) | Hay retention ring (additionnal height): 0 in / 3,5 in
  • Without incline conveyor: 101 in (2,57 m) | With incline conveyor (retracted): 115 in (2,92 m) | Outside width of the wheels: 86 in (2.18 m)
  • 15 080 lb (6839 kg)
  • Capacity (no capacity extension): 520 ft3 (14,7 m3) | 6 in capacity extension: 574 ft3 (16,3 m3) | 12 in capacity extension: 628 ft3 (17,8 m3) | 18 in capacity extension: 682 ft3 (19,3 m3)
  • Machine (empty) - STD configuration: 12 431 lb (5638 kg)
  • Number of Auger: 2 | Load cell: 3 | Axle - Standard specifications: Single